Disclosure: This post may contain affiliate links. This means that at no cost to you, we may earn a small commission for qualifying purchases.
There’s nothing worse when buying a new gadget other than getting home and seeing that it doesn’t work as it should. Even though Apple Watches and iPhones are designed especially for each other, there are some problems that make them unable to connect. If you are dealing with pairing problems between your Apple Watch and iPhone, then you have arrived at the right place.
Today we are going to check out what are the most common problems that cause pairing issues and we will also provide solutions. Without any further ado, let’s go ahead and fix your Apple Watch not pairing with iPhone problem.
How to Fix Apple Watch Not Pairing with iPhone
#1 Check the Connection
When dealing with pairing problems, the first thing that you need to check is the connection on the Apple Watch. If the connection is not working properly, then you will not receive any notifications, messages, or even calls that the iPhone is receiving. Follow the steps below to check the connection on Apple Watch:
- Access the Control Center on your Apple Watch by swiping up;
- If the iPhone icon is green, then it means that the wearable device is connected to the iPhone;
- If the iPhone icon is red, then it means that the wearable device is disconnected from the iPhone.
In case the iPhone icon is red, you will need to bring both devices close and restart the pairing process.
#2 Restart the Devices
If the connection is not the problem, then it’s always best to restart both devices. Most people don’t know this, but restarting an iPhone or Apple Watch will revert the device’s settings to default. Force restarting them might help you get rid of the bug that is causing pairing problems.
#3 Download the Latest Software Updates
One of the best things about using Apple products is the fact that you get access to all of the company’s latest software updates. Apple is always looking for new ways to take the performances and software stability of its devices to the next level. Therefore, we highly advise all iPhone and Apple Watch fans to make sure to download the latest software updates.
#4 Reset the Apple Watch
If the previous methods didn’t help you solve your pairing issues, then you may want to consider fully resetting the Apple Watch and then reconnect it again to the iPhone. Follow the steps below to reset your Apple Watch:
- Access the Settings app on your Apple Watch;
- Tap on General and then select the Reset option;
- Select the “Erase all content and settings” option;
- Confirm the action by tapping on “Erase all.
Following these steps will perform a full software reset for the Apple Watch. After the process is successfully finished, you need to try and connect it to the iPhone again.